Door Magnetic Sensor
1. Appearance
2. Packaging List
3. Add Door Magnetic Sensor
Click Home Security Hub , then click "+" and select "Add peripheral" .
Pull out the insulation strip to power up the device , the green indicator will flash and the device will show in the App.
*Note: If the device does not show in the App and green indicator is off , please press and hold the register button for 5s to try again.
Assign a room and click the "Done" to finish adding.
4. Testing Instruction
Signal Strength Test
Click " 
"→ "Signal Strength Test"→ " 
" to check signal strength.
5. Installation Instruction
Mount on the door by 3M adhesive strip
6. Device Specifications
| Parameter | Value |
|---|---|
| Model | RBSS-MC1 |
| Detection Method | Opening Contact |
| Detection Gap | >17 mm |
| Advanced Features | Digital Processing， Signal Strength detection， Find me |
| Tamper Protection | Rear |
| Transmission Technology | RBF Wireless Transmission |
| Transmission Frequency | 868/915 MHz |
| Transmission Range(Open Space) | 1900 m |
| Advanced Tech | AES-128 Encryption，FHSS，TDMA |
| Standard Battery Life | AA Battery× 1， Up to 5.5 years (standby mode) |
| Operation Temperature | -10°C to 55°C (14 °F to 131 °F) |
| Dimension(W x H x D) | 82 mm x 42 mm x 16 mm(Body) 82 mm x 11 mm x 18 mm(Magnet) |
| Weight | 55.6 g |
| Application Scenario | Indoor |
| Installation Method | Adhesive |