Skip to main content

Temperature & Humidity Monitor

1. Appearance



2. Packaging List


3. Add Temperature & Humidity Monitor

  1. Click Home Security Hub , then click "+" and select "Add peripheral" .

  2. Remove the back shell and install the battery to power up the device ,the signal bar will start lighting up one by one and and the device will show in the App.

    *Note: If the device does not show in the App and the signal bar is still , please press and hold the register button for 5s to try again.

  3. Assign a room and click the "Done" to finish adding.


4. Testing Instruction

Signal Strength Test

Click " 资源 15@4x "→ "Signal Strength Test"→ " 资源 16@4x " to check signal strength.

5. Device Specifications

Advanced FeaturesDigital Processing, Signal Strength detection,Find me
Transmission TechnologyRBF Wireless Transmission
Transmission Frequency868/915 MHz
Transmission Range(Open Space)1900 m
Advanced TechAES-128 Encryption, FHSS,TDMA
Power SupplyAA Battery× 3,Up to 5 years (standby mode)
Operation Temperature-10°C to 55°C (14 °F to 131 °F)
Dimension(W x H x D)64 mm×64 mm×28 mm
Weight68.5 g
Application ScenarioIndoor