Wall Switch
1. Appearance
2. Packaging List
3. Add Wall Switch
Power up the wall switch by connecting to 110V or 230V AC power supply.
*Note: Please use the provided terminal block for wiring.
Click Home Security Hub , then click "+" to add wall switch by scanning the QR code.
4. Testing Instruction
Signal Strength Test
Click " 
"→ "Signal Strength Test"→ " 
" to check signal strength.
5. Device Specifications
| Parameter | Value |
|---|---|
| Model | RBAD-WS1 |
| Scene Setting | Scenes can be created through the App |
| Power Switch Button | Power on/off control |
| Advanced Features | Signal Strength detection， Find me |
| LEDs Status | 3，register/signal (orange/green/red)， power (green)， relay status (blue) |
| Transmission Technology | RBF Wireless Transmission |
| Transmission Frequency | 868/915 MHz |
| Transmission Range(Open Space) | 1900 m |
| Advanced Tech | AES-128 Encryption，FHSS，TDMA |
| Power Supply | AC 110V/230V，50/60Hz，Max 3000W |
| Relay Output | 1, NO/NC (110V/230V AC，Max 13A) |
| Operation Temperature | -10°C to 55°C (14 °F to 131 °F) |
| Dimension(W x H x D) | 40mm×35mm×20mm |
| Weight | 29.3g |
6. CAUTION
- Install the device according to the instructions in this manual.
- This device is not suitable for use in locations where children are likely to be present.
- This device is suitable for use in gang box or other encloslure protected device only.
- To prevent injury, this device must be securely attached to the floor/wall in accordance with the installation instructions.
- No naked flame sources, such as lighted candles, should be placed on the equipment.
- The device has been designed, when required, modified for connection to an IT power distribution system.
- A readily accessible disconnect device shall be incorporated external to the device.
- The socket-outlet shall be installed near the device and shall be easily accessible.
- Use only power supplies at the standard of 110 VAC or 230 VAC, 50/60 HZ.
- The device shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the device.
- Ensure correct wiring of the terminals for connection to an AC mains supply.
- The external wiring connected to the terminals requires installation by an instructed person.