Outdoor Siren
1. Appearance
2. Packaging List
3. Add Outdoor Siren
Click Home Security Hub , then click "+" and select "Add peripheral" .
Turn on the power switch
to power it up, the indicator will flash and the device will show in the App.*Note: if the device does not show in the App and indicator is off, please press and hold the register button for 5s to try again.
Assign a room and click the "Done" to finish adding.
4. Testing Instruction
Signal Strength Test
Click " 
"→ "Signal Strength Test"→ " 
" to check signal strength.
Volume Test
Click " "→ "Volume Test"→ " " to test volume.
5. Installation Instruction
Mount on the wall by screws
6. Device Specifications
| Parameter | Value |
|---|---|
| Model | RBAD-SO1 |
| Alarm Buzzer | 85dB/95dB/105dB |
| Advanced Features | Signal Strength detection，Find me |
| Tamper Protection | Rear |
| LED Indicator | 3 |
| Transmission Technology | RBF Wireless Transmission |
| Transmission Frequency | 868/915 MHz |
| Transmission Range(Open Space) | 3100 m |
| Advanced Tech | AES-128 Encryption， FHSS， TDMA |
| Power Supply | 1700 mAh Lithium battery with Solar charging， Battery Life Up to 4.2 years (standby mode) |
| Operation Temperature | -10°C to 55°C (14 °F to 131 °F) |
| Dimension(W x H x D) | 290 mm x 200 mm x 58 mm |
| Weight | 645.5 g |
| IP rate | IP65 |
| Installation Method | Wall mounting |
| Application Scenario | Outdoor |